Major Tech MT195T Cable Locator Transmitter
Previous
Major Tech MT195 Cable Locator Incl Hard Carrying Case
The MT195 Cable locator consists of a transmitter and a receiver which is a lightweight portable instrument and can be used to detect or trace conductors. The signal generated by the transmitter is made of a modulated current, generating an electro-magnetic field around a conductor. The electro-magnetic field induces a voltage within the receiving coil. The induced voltage is amplified, decoded and converted to the original signal by the receiver and finally displayed on the receiver's screen. The connecting parameter for the transmitter during an application must be a closed current circuit.
Accessories:
- Cable Identifier (MT195T)
- Carrying Case
- 9V Battery
- Test Leads
- Instruction Manual
Technical Datasheet Instruction Manual
Additional information
| Voltage Range |
12-400V |
|---|---|
| Frequency Range |
0-60Hz |
| MCB/Fuse finding |
Find MCB or fuse on a dead circuit |
| Beeper |
Continuous tone-strongest signal, intermittent-weak signal |
| Tracing Depth |
Depends on medium and application |
| Green |
Everything is Good |
| RED |
Hazard, Voltage on Circuit |
| Cable Locator Mode |
0-2meters (single-pole application) |
| Voltage detection |
0-0.4meters |
| Wire tracing |
Traces wires through wall, floors and underground |
| Wire break detection |
Locates break in the cable |
| Bargraph |
Peak tracking with bar graph |
| Interruptions |
detects interruptions and short-circuits in underfloor heating |
| Power source |
2 x 6F22 |
| Output Signal |
125kHz |
| Low battery indication |
Yes |
| Enclosure |
Molded casing |
| Display |
LCD Display |
| Weight |
TX 130G, REC 180g |
| Dimensions |
TX 130 x 69 x 32mm, REC 192 x 61 x 37mm |
- Receiver indicates reception level, transmission code as well as mains voltage detection
- Transmitter measures V 12V – 400V AC / DC
- Detects metallic water piping
- Detects live or dead cables inside walls
- Detects interruptions and short circuits in under floor heating (using additional MT195T)
- Transmitter with LCD display included
- Acoustical receiving signal switchable
- Frequency 60Hz
- Output Signal 125 kHz
- Locating and tracing lines
- CATIII 300V / CATII 600
-
-
Major Tech K2500 0.01mA - 120.0mA DC Milliamp Process Clamp MeterR 11 362,00 inc. vat -
-
-
-
