Major Tech MT1880 Auto Ranging DMM, VGB, CATIV 600V IP67 - Multimeter
MajorTech MT1880. This 6000 count Industrial multimeter DMM sets the standard with a combination of precision, features, easy-to-use functions, with safety and reliability and boasts a 0.09% basic accuracy. This meter enjoys the feature of having the rotary switch be turned in any direction without damaging the meter whilst signals less than 1000V AC/DC are input into the meter. This meter is protected against measuring voltage whilst the knob is set on the ohms range accidentally. The large LCD display with analogue bargraph and backlit ensure that readings are easy to read under all circumstances.
Accessories:
Type K Temperature Probe
9V Battery
MT810 Test Leads
Instruction Manual
ADDITIONAL INFORMATION
| DC Voltage |
1000V |
|---|---|
| DC Voltage resolution |
0.1mV |
| DC Voltage accuracy |
±(0.1% +4) |
| AC Voltage |
750V |
| AC Voltage resolution |
1mV |
| AC voltage accuracy |
±(1.2% +6) |
| DC Current |
10A |
| DC Current resolution |
0.1µA |
| DC Current accuracy |
±(1.0% +5) |
| AC Current |
10A |
| AC current resolution |
0.1µA |
| AC Current accuracy |
±(1.2% +6) |
| Duty Cycle |
0.1 to 99.9% |
| Duty Cycle resolution |
0.10% |
| Duty Cycle accuracy |
±(1.2% +2) |
| Resistance |
40MΩ |
| Resistance resolution |
0.1Ω |
| Resistance accuracy |
±(1.2% +2) |
| Frequency |
9.999Hz to 9.999MHz |
| Frequency resolution |
0.001Hz |
| Frequency accuracy |
±(1.2% +3) |
| Capacitance |
4000µF |
| Capacitance resolution |
10pF |
| Capacitance accuracy |
±(3% +10) |
| Continuity |
Yes |
| Diode Test |
Yes |
| VGB Ghost Voltage |
Yes |
| AC Bandwidth |
50Hz to 400Hz |
| Digital Display |
4000 |
| Bargraph |
Yes |
| Non-Contact Voltage (NCV) |
Yes |
| Over-range indication |
Yes |
| Input Impedance |
˃10MΩ VDC & ˃9MΩ VAC |
| Min Max |
Yes |
| Data Hold |
Yes |
| Back Light |
Yes |
| Enclosure |
Double moulded waterproof IP67 |
| Low battery indication |
Yes |
| Power source |
6LF22 |
| Dimensions |
187 x 81 x 50mm |
| Weight |
342g |
- When AC voltage measured, LCD turns red to indicate presence of voltage
- Non contact voltage detector, LCD turns red
- Auto range with manual override
- Measures AC & DC voltage to 1000V & Capacitance to 400µF
- Relative mode / data hold
- NCV detection above 110V AC
- MIN/MAX recording
- Measures resistance up to 40MΩ
- 4000 Count LCD with 11 segment bargraph
- Full ranges protection / Auto power off
- Overmould rubber housing & Integrated test lead holder
- Backlight for dimly lit areas
- Measures ghost voltage
- IP67 dust and waterproof with O-Ring sealed casing
- CAT IV 600V and CAT III 1000V
